Canon imageRUNNER 2270 Service Manual page 636

Chapter 15
YY
*5 02
*6 02
*7 02
15-30
Description
A file system error has occurred.
There is a file system error.
A file system error has occurred.
Remedy
1. Type in TYPE-TYPE of the partition in
question, and execute HDD-CLEAR. Thereafter,
turn off and then back on the main switch.
2. If the system still exits after the foregoing,
suspect a fault on the HDD, and replace the HDD
and re-install the system software.
The system software is designed so that the
information in this partition (e.g., address book,
filter) is not deleted inadvertently; i.e., you will
not the able to execute HDD-CLEAR from
service mode.
1. If possible, ask the user to back up the address
book data using the RUI.
2. From service mode, start download mode; then,
execute full formatting using the SST and re-
install the system software (System, Language,
RUI). Thereafter, turn off and the back on the
main power.
This type of error is highly rare.
1. Using TYPE-TYPE=1, 2, 3, 5, execute HDD-
CLEAR. Thereafter, turn off and then back on the
power.
2. If the symptom still exits after the foregoing,
suspect a fault on the HDD, and replace the HDD
and re-install the system software.