Chapter 13
tray.
4) Loosen the fixing screw [1] on the top
cover of the manual feed tray.
5) While referring to the index you
checked in step 2), move the top cover of
the manual feed tray back and forth.
Moving the top cover of the manual
feed tray toward the rear of the machine
will increase the front margin.
F-13-36
6) Tighten the fixing screw on the top
cover of the manual feed tray.
7) Put paper in the manual feed tray.
8) Make a copy using the manual feeder as
the source of paper, and check to make sure
that the margin along the front is 2.5 +/-1.5
mm.
13-24
13.6.4
Registering
the Paper Width
Basic Value
1) Turn on the main power switch.
2) Register the paper width basic value for
A4R as follows:
2-1) Match the manual feed side guide [1]
against the A4R marking.
F-13-37
2-2) Start service mode, and select 'register
manual feed d A4R width'.
CPOIER>FUNCTION>CST>MF-A4R
2-3) Press the OK key to save the new A4R
width.
3) Register the paper width basic value for
A4 as follows:
3-1) Mach the manual feed guide against
the A4 marking.
3-2) In service mode, select 'manual feed
A4 width'.
CPOIER>FUNCTION>CST>MF-A4
3-3) Press the OK key to save the new A4
0007-4926
[1]
[1]