Image Adjustments; Standards For Image Position; Adjusting The Image Position - Canon imageRUNNER 2270 Service Manual

13.1 Image Adjustments

13.1.1 Standards for
Image Position
A print made at a magnification of 100%
must meet the following standards for
image margin/non-image width:
- Margin Along the Leading Edge
0 2 4 6 8 10 12 14 16 18 20 5
F-13-1
- Left/Right Image Margin
2.5 1.5mm
2nd side of double-sided copy
0
2
4
5
6
8
10
F-13-2
- Leading Edge Non-Image Width
0007-4812
2.5 1.5mm
2nd side of double-sided copy
2.5 2.0mm
2.5 2.0mm
2nd side of double-sided copy
0 2 4 6 8 10 12 14 16 18 20 5
F-13-3
- Left/Right Non-Image Width
2.5 1.5mm
2nd side of double-sided copy
0
2
4
5
6
8
10
F-13-4
13.1.2 Adjusting the
Image Position
Using the source of paper indicated, make
10 prints each to see if the image margin
and the non-image margin are as indicated:
[1] Cassettes
[2] Manual feed tray
[3] Side paper deck
If not as indicated, adjust the image
position as follows:
1.Adjusting the Leading Edge Image
Margin (1st side)
Adjust the registration in service mode:
Chapter 13
2.5 1.5mm
2.5 1.5mm
2.5 1.5mm
0007-4813
13-1