Canon imageRUNNER 2270 Service Manual page 265

Chapter 7
[2]
[1]
[1]
[1]
F-7-36
7.12.3.10 Removing the
Laser Unit
1) Open the 2 wire saddles [1], and
disconnect the 2 connectors [2].
F-7-37
7-36
When
connector [1], be sure to take care so that it
will not come into contact with the PCB
that is mounted to the laser scanner unit.
(The PCB is equipped with a laser intensity
adjustment variable resistor. Contact with
the PCB can change the adjustment
setting.)
2) Open the wire saddle [1], and disconnect
the connector [2].
0007-8359
3) Remove the screw [1], and detach the
fixing [2].
you have disconnected
F-7-38
F-7-39
the