Scheduled Servicing Basic Procedures - Canon imageRUNNER 2270 Service Manual

Laser Location
scann
Task
er
Interval
assem
bly
Remarks
[1]Dust-blocking glass
The foregoing values are estimates only, and are subject to change depending on future
data.

12.3.3 Scheduled Servicing Basic Procedures

- As a rule, perform scheduled servicing every 120,000 prints.
- Before setting out on a scheduled visit, check with the Service Book, and take parts for
which replacement is expected.
- If the power plug is exposed to dust, humidity, or oily smoke, the resulting buildup can
prove to be a fire hazard. (The buildup of dust, for instance, can absorb moisture and suffer
insulating failure.) Be sure to disconnect the power plug on a periodical basis, and remove
any buildup of dust and dirt with a dry cloth.
<Work Procedure>
Dust-blocking glass
clean:(dry wiping or alcohol)
120,000 prints
Chapter 12
0007-5173
12-9