2In Pipe Mounting Instruction; Wall Mounting - ABB 364G Series Manual

Horizontal pipe
Vertical bracket
Transmitter on up
Horizontal pipe
Vertical bracket
Transmitter on side (parallel)

2in Pipe mounting instruction

1. Fix the bracket in the defined position
on the pipe using the tool
adapter to guarantee the best
mechanical performances of the
assembly
2. Tight the nuts with the washers
below them in order to fix the bracket (the
torque value shall be 10 Nm - 12 Nm)
Fix the Pressure transmitter using the two
screws in the package; (the torque value
shall be 1 Nm ± 0.2 Nm)

Wall mounting

In this chapter you can find suggestions for wall mounting. These suggestions shall not limit alternative
solutions that the end user can define himself.
and the
364Ax-Gx Instruction Manual
17