Parameter Description Hart® (For Hart®-Devices To Sw-Rev.: 01.03); Menu: Device Setup - ABB TTF300 Operating Instruction

54 TTF300 FIELD-MOUNT TEMPERATURE TRANSMITTER | OI/TTF300-EN REV. I
... 10 Operation
Parameter description HART® (for HART®-devices to SW-Rev.: 01.03)

Menu: Device Setup

Menu / parameter
... / Device Setup
Write protection
Input Sensor 1
Input Sensor 2
Input / output assignment
Measured range
Damping
Factory reset
... / Device Setup / Input Sensor 1
... / Device Setup / Input Sensor 2
Sensor Type
Description
Activates write protection for the entire device
• Yes: locked
Input combination:≠ 0110
• No: unlocked
Input combination:0110
Select the 'Input Sensor 1' submenu.
Select the 'Input Sensor 2' submenu.
Input / output assignment selects the inputs that are mapped to the current output
• Sensor 1
• Sensor 2
• Difference (S1-S2)
• Difference (S2-S1)
• Meanvalue
• Electr. Meas. S1
• Electr. Meas. S2
• Redundancy
• Temp. Electronics
Select the 'Measured range' submenu.
Configurable τ 63% output signal damping value
Value range:0 to 100 s
Resets configuration data, adjustment data trim high / low and DAC adjustment values to factory settings.
• Yes / OK
Selects sensor type:
• Pt100 (IEC751):Pt100 resistance thermometer (IEC 751)
• Pt1000 (IEC751):Pt1000 resistance thermometer (IEC 751)
• Type K TC (IEC584):Thermocouple type K (IEC 584)
• Type B TC (IEC584):Thermocouple type B (IEC 584)
• Type C TC (ASTME988):Type C thermocouple (IEC584)
• Type D TC (ASTME988):Thermocouple type D (ASTME 988)
• Type E TC (IEC584):Thermocouple type E (IEC 584)
• Type J TC (IEC584):Type J thermocouple (IEC584)
• Type N TC (IEC584):Thermocouple type N (IEC 584)
• Type R TC (IEC584):Type R thermocouple (IEC584)
• Type S TC (IEC584):Type S thermocouple (IEC584)
• Type T TC (IEC584):Type T thermocouple (IEC584)
• Type L TC (DIN43710):Type L thermocouple (DIN43710)
• Type U TC (DIN43710):Type U thermocouple (DIN43710)