Table of Contents
Advertisement
CONTENTS
Section
INTRODUCTION ............................................................ 3
TRANSPORT, STORAGE, HANDLING AND
PRODUCT IDENTIFICATION ........................................ 4
PRINCIPLE OF OPERATION ........................................ 5
INSTALLATION .............................................................. 7
ELECTRICAL CONNECTIONS ..................................... 8
ELECTRICAL REQUIREMENTS ................................ 10
RANGE AND SPAN CONSIDERATION ...................... 10
CALIBRATION ............................................................. 11
DISMANTLING AND REASSEMBLY .......................... 13
SIMPLE FAULT FINDING ............................................ 16
RETURNING FORM .................................................... 17
THE TRANSMITTERS ................................................. 18
PROGRAMMABLE INDICATOR .................................. 25
ADDENDUM FOR PV-SCALING OPERATION ........... 30
OF THE TRANSMITTERS ........................................... 31
ON THE SECONDARY ELECTRONICS ..................... 34
FUNCTIONS ................................................................ 36
TRANSMITTERS ......................................................... 42
AND "IP" PROTECTION (EUROPE) ........................... 48
SUPPLEMENTARY DOCUMENTATION
Reference information on remote seals and configuration of
the transmitter can be found in the following documents:
SS/S264x
Remote Seal Specification
SS/264xx
Data Sheets
SL/2600T
Spare Part List
IM / 691HT
Hand-Held Communicator
Online HELP SMART VISION Configuration Program
INTRODUCTION
Page
The 2600T series is a modular range of field mounted, micro-
processor based electronic transmitters, using a unique
inductive sensing element. Accurate and reliable
measurement of differential pressure, gauge and absolute
pressure, flow and liquid level is provided, in the even most
difficult and hazardous industrial environments.
The 2600T Smart series transmitter now includes an Analog
Version plus HART digital communication, a Profibus DP-PA
and a Fieldbus FOUNDATION version.
Digital communication protocols allow remote re-ranging,
calibration and diagnostics.
With respect to HART, the bidirectional digital communication
does not have any interference with the standard 4-20 mA
analog output signal.
Profibus has a complete digital only communication, as well as
for Fieldbus FOUNDATION.
This manual describes the features, the installation and
calibration procedures related to the 2600T Series Transmitter
with HART Communication Protocol.
The 2600T series also gives the opportunity to utilize
capacitive and piezo-resistive sensing element for certain
models and applications.
- 3 -
Advertisement
Table of Contents
