Installation; Initial Inspection - Keysight U1832A User Manual

Usb noise sources
Table of Contents

Advertisement

2

Installation

Initial Inspection

1 Unpack and inspect the shipping container and its contents thoroughly to
2 If the contents are damaged or defective, contact your nearest Keysight
3 If you are returning the instrument under warranty or for service, repackaging
18
ensure that nothing was damaged during shipment. If the shipping container
or cushioning material is damaged, the contents should be checked both
mechanically and electrically.
– Check for mechanical damage such as scratches or dents.
– Procedures for checking electrical performance are given under
check"
on page 40.
Technologies Service and Support Office. Refer to
Support"
on page 5 of this manual. Keysight Technologies will arrange for
repair or replacement of the damaged or defective equipment. Keep the
shipping materials for the carrier's inspection.
the instrument requires original shipping containers and material or their
equivalents. Keysight Technologies can provide packaging materials identical
to the original materials. Refer to
this manual for the Keysight Technologies nearest to you. Attach a tag
indicating the type of service required, return address, model number, and
serial number. Mark the container FRAGILE to insure careful handling. In any
correspondence, refer to the instrument by model number and serial number.
"Sales and Technical Support"
Keysight U1832A/B/C and U1833A/B/C/D User's Guide
"Operator's
"Sales and Technical
on page 5 of

Advertisement

Table of Contents
loading

This manual is also suitable for:

U1832bU1832cU1833aU1833bU1833cU1833d

Table of Contents