Cleaning The Oven; Removing The Oven Door; Replacing The Oven Lamp - Whirlpool ACM220 Instructions For Use Manual

NOTICE
Damage of the control panel!
Do not remove the control knobs for
control panel cleaning.

Cleaning the oven

To clean the side wall
To clean the side wall, unscrew the 4
screws on the steel rack. After cleaning
operation, assemble the steel rack to
the oven body again.
Clean oven door
To clean the oven door, use warm
water with washing liquid, a soft cloth
or sponge to clean the product and
wipe it with a dry cloth.
Important
Don't use any harsh abrasive
cleaners or sharp metal scrapers
for cleaning the oven door. They
could scratch the surface and
destroy the glass.

Removing the oven door

Oven door can be removed in order to
clean the inside of oven easily.
1. Open the oven door completely.
2. Press the hinge clamps located at
both sides of the door backwards.
1 Hinge clamp
2 Hinge
3. Move the oven door to a slightly
inclined position.
4. Raise the oven door forwards with
your two hands.
5. Once you complete cleaning,
perform the same procedure in
reverse order to reinstall the oven
door.
Once you complete cleaning, perform
the same procedure in reverse order to
reinstall the oven door.

Replacing the oven lamp

DANGER
Hot surfaces may cause burns!
Make sure that the appliance is
switched off and cooled down in
order to avoid the risk of an
electrical shock.
23 | EN