Download Print this page

Important Safety Instructions; General Safety - Whirlpool ACM220 Instructions For Use Manual

Hide thumbs

Advertisement

Table of Contents
2

Important safety instructions

This section contains safety
instructions that will help you avoid risk
of injury and damage. All warranties
will become void if you do not follow
these instructions.

General safety

WARNING: The appliance and its
accessible parts become hot
during use. Care should be taken
to avoid touching heating
elements.
Children less than 8 years old
shall be kept away, unless
continuously supervised.
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
hazards involved. Children shall
not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
WARNING: Accessible parts may
become hot during use. Young
children should be kept away.
Do not use harsh abrasive
cleaners or sharp metal scrapers
to clean the oven door glass
since they can scratch the
surface, which may result in
shattering of the glass.
WARNING: Ensure that the
appliance is switched off before
replacing the lamp to avoid the
possibility of electric shock.
WARNING: Unattended cooking
on a hob with fat or oil can be
dangerous and may result in fire.
NEVER try to extinguish a fire
with water, but switch off the
appliance and then cover flame
e.g. with a lid or a fire blanket.
WARNING: Danger of fire: do
not store items on the cooking
surface. This appliance is not
intended to be operated by
means of an external timer or
separate remote-control
system.
WARNING: If the surface is
cracked, switch off the appliance
to avoid possibility of electric
shock.
Connect the product to an earthed
outlet/line protected by a fuse of
suitable capacity as stated in the
"Technical specifications" table.
Have the earthing installation made
by a qualified electrician while
using the product with or without a
transformer. Our company shall not
be liable for any problems arising
due to the product not being
earthed in accordance with the
local regulations.
If the supply cord is damaged, it
must be replaced by the
manufacturer, its service agent or
similary qualified persons in order
to avoid a hazard.
7 | EN

Advertisement

Table of Contents
loading