Download Print this page

Troubleshooting - Whirlpool ACM220 Instructions For Use Manual

Hide thumbs

Advertisement

Table of Contents
8

Troubleshooting

Oven emits steam when it is in use.
It is normal that steam escapes during operation. This is not a fault.
Water drops occur during cooking
The vapour that arises during cooking can condense and form water droplets when it hits
cold surfaces of the product. This is not a fault.
Product does not operate.
The mains fuse is defective or has tripped.
Oven light does not work.
Oven lamp is defective.
Power is cut.
Oven does not heat.
Function and/or Temperature are not set.
Power is cut.
Important
Consult the Authorised Service Agent or the dealer where you have purchased the
product if you can not remedy the trouble although you have implemented the
instructions in this section. Never attempt to repair a defective product yourself.
Check fuses in the fuse box. If necessary,
replace or reset them.
Replace oven lamp.
Check if there is power. Check the fuses in
the fuse box. If necessary, replace or reset
the fuses.
Set the function and the temperature with
the Function and/or Temperature knob/key.
Check if there is power. Check the fuses in
the fuse box. If necessary, replace or reset
the fuses.
25 | EN

Advertisement

Table of Contents
loading