Base Back Cover Replacement - Precor Experience Series Service Manual

Base Back Cover Replacement

This procedure replaces the Base Back cover.
Removal Instructions
1. Remove the base front cover, see
installation.
1. Remove the two #3 Phillips screws at the front top of the base back cover. Pull up and
rearward to remove. Retain part(s) and/or fastener(s) for installation.
Installation Instructions
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"" on page 73. Retain part(s) and/or fastener(s) for
6 Replacement Procedures
Covers and Panels Replacement
Page 75