Drive Components assembly Replacement
About
This procedure provides instruction to remove and install the Drive Components assembly.
The Drive Components assembly consists of the Step-up Pulley/Tensioner assembly and
Generator Eddy Brake assembly.
Procedure
Review entire procedure before starting.
Removal Instructions
1. Remove the Drive Access cover, see
2. Remove the left and right Drive Disk covers, see
3. Remove the left and right Stairarms from the Input Crank, see
arm from the Input Drive Crank" on
4. Remove the Drive Top and left/right Drive Housing covers see
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Drive Components assembly Replacement
"" on
page 78.
" > " on
page 80.
page 154.
6 Replacement Procedures
"Removing the Stair-
" > " on
page 84.
Page 119