Using This Manual - Christie Roadie HD+35K User Manual

1 Introduction
Every effort has been made to ensure the information in this document is accurate and reliable; however, due to
constant research, the information in this document is subject to change without notice.
1.1

Using this Manual

USERS/OPERATORS:
brightness projection systems, located in restricted areas, such as projection rooms in theatres. Such users may
also be trained to replace the lamp and air filter, but cannot install the projector or perform any other functions
inside the projector.
NOTE:
Only personnel trained specifically by Christie on lamp replacement and lamp safety may handle the
lamp.
SERVICE: Only Christie accredited service technicians knowledgeable about all potential hazards associated
with high voltage, ultraviolet exposure, and high temperatures generated by the lamp and associated circuits
are authorized to 1) assemble/install the projector and 2) perform service functions inside the projector.
This manual contains the following sections:
• Section 1 Introduction
• Section 2 Installation and Setup
• Section 3 Operation
• Section 4 Maintenance
• Section 5 Troubleshooting
• Section 6 Specifications
• Section Appendix A: Serial Communication Cables
• Section Appendix B: Menu Tree
• Section Appendix C: System Integration
• Section Appendix D: Optional Input Modules
Disclaimer :
Every effort has been made to ensure the information in this document is accurate and reliable.
However, due to constant research, the information in this document is subject to change without
notice. Christie Digital Systems assumes no responsibility for omissions or inaccuracies. Updates to
this document are published regularly, as required. Please contact Christie Digital Systems for
availability.
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
This manual is intended for trained users authorized to operate professional high-
1-1