Using This Manual; Typographical Notations - Christie Solaria CP2220 User Manual

1 Introduction
1.1

Using this Manual

USERS/OPERATORS: This manual is intended for trained users authorized to operate professional high-
brightness projection systems, located in restricted areas, such as projection rooms in theatres. Such users may
also be trained to replace the lamp and air filter, but cannot install the projector or perform any other functions
inside the projector. NOTE: Only personnel trained specifically by Christie on lamp replacement and lamp
safety may handle the lamp.
SERVICE: Only qualified Christie trained service technicians knowledgeable about all potential hazards
associated with high voltage, ultraviolet exposure and high temperatures generated by the lamp and associated
circuits are authorized to 1) assemble/install the projector and 2) perform service functions inside the projector.
This manual contains the following sections:
• Section 1 Introduction
• Section 2 Installation and Setup
• Section 3 Operation
• Section 4 Maintenance
• Section 5 Troubleshooting
• Section 6 Specifications
• Appendix A: Intelligent Lens System
• Appendix B: Serial API
• Appendix C: SCCI Port
• Appendix D: GPIO Port
Disclaimer: Every effort has been made to ensure the information in this document is accurate and reliable. However, due
to constant research, the information in this document is subject to change without notice. Christie Digital Systems
assumes no responsibility for omissions or inaccuracies. Updates to this document are published regularly, as required.
Please contact Christie Digital Systems for availability.

1.1.1 Typographical Notations

The following notations are used throughout this manual:
• Keypad commands and PC keystrokes appear in bold small caps, such as
• References to specific areas of the document appear italicized and underlined. When viewed online the text
appears in blue indicating a direct link to that section. For example,
• References to other documents appear italicized and bold, such as Service Manual.
• References to software menus and available options appear bold, such as Main panel,
Preferences.
• User input or messages that appear on screen, in status display units or other control modules appear in
Courier font. For example. "No Signal Present", Login: christiedigital.
• Error codes, LED status appear in bold, e.g.
• Operational states of modules appear capitalized, such as power ON/OFF.
CP2220 User Manual
020-100420-06 Rev. 1 (03-2011)
Section 2 Installation and
LP, A1 etc.
, ,
etc.
POWER INPUT ENTER
Setup.
1-1