Installing Line Key Kit (12Lk-L Kit); Installing The 12Lk-L Kit - NEC Univerge SV9100 Hardware Manual

Issue 1.2
4.5
5 - 50
Installing Line Key Kit (12LK-L KIT
The 12LK-L KIT Provides twelve additional buttons to ITL or DTL multiline
terminals. The 12LK-L KIT kit:
Mounts directly to top side of terminal

Supports Red and Green LED colors

4.5.1

Installing the 12LK-L KIT

To prevent possible damage to the 12LK-L KIT or
the DTL/ITL multiline terminal during installation
or removal, disconnect the line cord/LAN cable
and the AC/DC adapter from the DTL/ITL
multiline terminal.
1. Turn multiline terminal upside down.
Only one 12LK-L KIT can be attached to the DTL/ITL multiline
.
terminal.
2. Pry the right-side panel from the multiline terminal.
3. From the lower left or right corner, pry the Line Key Panel from
the multiline terminal (refer to
Key Panel on page
)
Figure 5-40 12LK-L Kit
Figure 5-41 Removing the Line
5-51).
Installing DT Series Digital and IP Multiline Terminals
UNIVERGE SV9100