Unmanaged Switch Functions; Led Indications; Connectors - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
2. User removes Add-on board and moves it to slot 6.
3. User relocates the Main board to slot 4.
The grouping of the three GSWU units to form a 20 port
switch is restricted to reside in a single system location. The
grouping is not allowed where the GSWU units are placed
as part of the NetLink feature in the Univerge SV8100
system.
6.3.2.5

Unmanaged Switch Functions

In the unmanaged mode, a GSWU unit will have the
following functions only:
6.3.3

LED Indications

1000Mbps Link
10/100Mbps Link
No Link
Port Activity
6.3.4

Connectors

Backplane Connector – J1 connection to system CPU board and
other boards in the chassis.
The re-inserted board automatically gets ports
17 ~ 24 (9 ~ 16 are unavailable).
User can erase the ports 9 ~ 16.
.
Then reinsert the board in slot 6 to get ports 9 ~ 16.
.
None of the port numbers change. However, the
programming in Program 10-55 must be changed to
reflect this move.
10/100/1000 Ethernet ports (x8)
PoE Class 3 (lowest power class)
Table 4-56 CD-ETIA LED Indications
Port State
Issue 5.0
LED Display
Green Solid
Yellow Solid
Off
LED Blinking
4 - 109