Detailed Descriptions Of Commands; At+Cipmux Start Up Multi-Ip Connection; At+Cipstart Start Up Tcp Or Udp Connection - SimCom SIM5300E At Command Manual

AT+CIPUDPMODE
AT+CIPRXGET
AT+CIPRDTIMER
AT+CIPSGTXT
AT+CIPOPTION
AT+CIPSENDHEX
AT+CIPHEXS
AT+CIPSSL
7.2

Detailed Descriptions of Commands

7.2.1

AT+CIPMUX Start Up Multi-IP Connection

AT+CIPMUX Start Up Multi-IP Connection
Test Command
AT+CIPMUX=?
Read Command
AT+CIPMUX?
Write Command
AT+CIPMUX=<n>
Parameters
Reference
7.2.2

AT+CIPSTART Start Up TCP or UDP Connection

AT+CIPSTART Start Up TCP or UDP Connection
SIM5300E AT Command Manual V1.02
UDP extended mode
Get data from network manually
Set remode delay timer
Select GPRS PDP context
Set TCP Option
Set CIPSEND Data Format to Hex
Set CIPSEND Data Format with suffix
Enable TCP SSL function
Response
+CIPMUX: (list of supported<n>s)
OK
Response
+CIPMUX: <n>
OK
Response
OK
<n>
0 Single IP connection
1 Multi IP connection
Note:
Only in IP initial state, AT+CIPMUX=1 is effective;
Only when multi IP connection and GPRS application are both shut
down, AT+CIPMUX=0 is effective.
147