At+Crsm Restricted Sim Access - SimCom SIM5300E At Command Manual

Reference
3GPP TS 27.007 [13]
3.2.30

AT+CRSM Restricted SIM Access

AT+CRSM Restricted SIM Access
Test Command
AT+CRSM=?
Write Command
AT+CRSM=<Command>[,<fileI
d>[,<P1>,<P2>,<P3>[,<data>]]]
Parameters
SIM5300E AT Command Manual V1.02
<N2>
1-255 Retransmission attempts N2
SIMCom redefined the range of values used by the parameters.
Response
OK
Response
+CRSM: <sw1>, <sw2> [,<response>]
OK
If error is related to ME functionality:
+CME ERROR: <err>
<Command>
176 READ BINARY
178 READ RECORD
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD
242 STATUS
All other values are reserved; refer GSM 11.11.
<fileId> Integer type; this is the identifier for an elementary data file on
SIM. Mandatory for every Command except STATUS
<P1>,<P2>,<P3> Integer type, range 0 – 255
Parameters to be passed on by the ME to the SIM; refer GSM 11.11.
<data> Information which shall be written to the SIM (hex-decimal
character format)
<sw1>, <sw2> Integer type, range 0 - 255
Status information from the SIM about the execution of the actual
Command. These parameters are delivered to the TE in both cases, on
successful or failed execution of the Command; refer GSM 11.11.
<response> Response of a successful completion of the Command
previously issued (hexadecimal character format)
51