Atl Set Monitor Speaker Loudness; Ato Switch From Command Mode To Data Mode - SimCom SIM5350 Command Set

SIM5350 AT Command Set
Examples
ATI
Manufacturer: SIMCOM INCORPORATED
Model: SIMCOM_SIM5350L
Revision: SIM5350L_V12.31
IMEI: 351602000330570
+GCAP: +FCLASS, +CGSM
OK
3.6

ATL Set Monitor speaker loudness

Description
Set volume of the monitor speaker.
SIM PIN References
NO V.25ter
Syntax
Execution Command
ATL[<value>]
Defined values
<value>
0 Low speaker volume
1 Low speaker volume
2 Medium speaker volume
3 High speaker volume
Examples
ATL
OK
3.7

ATO Switch from command mode to data mode

Description
ATO is the corresponding command to the
data call connected and the TA is in Command Mode,
takes back to Data Mode.
SIM PIN References
SIM5350_ATC_V1.02
Responses
OK
+++ escape sequence. When there is a CSD call or a PS
ATO
16
causes the TA to resume the data and
6/9/2014