At+Ftpstate Get Ftp Current State; At+Ftpextput Extend Upload File - SimCom SIM5300E At Command Manual

11.2.18 AT+FTPSTATE Get FTP Current State

AT+FTPSTATE Get FTP Current State
Test Command
AT+FTPSTATE=?
Execution Command
AT+FTPSTATE
Parameters
Reference

11.2.19 AT+FTPEXTPUT Extend Upload File

AT+FTPEXTPUT Extend Upload File
Test Command
AT+FTPEXTPUT=?
Write Command
1)if mode is 0 or 1 or 2
AT+FTPEXTPUT=<mode>[,<pos
>,<len>,<timeout >]
2)if mode is 3
AT+FTPEXTPUT=<mode>,<file
name>
SIM5300E AT Command Manual V1.02
commands.
Response
OK
Response
+FTPSTATE: <state>
OK
If error is related to ME functionality:
+CME ERROR: <err>
<state>
0 idle
1 in the FTP session, including FTPGET, FTPPUT, FTPDELE and
FTPSIZE operation.
Note
Response
OK
Response
If mode is 0 or 1
OK
If mode is 2
+FTPEXTPUT:<address>,<len>
...... //Input data
OK
If mode is 3 and file is exist in flash
OK
If error is related to ME functionality:
199