At Commands For Http Application; Overview; Detailed Descriptions Of Commands; At+Httpinit Initialize Http Service - SimCom SIM5300E At Command Manual

10.

AT Commands for HTTP Application

SIM5300E has an embedded TCP/IP stack that is driven by AT commands and enables the host application
to easily access the Internet HTTP service. This chapter is a reference guide to all the AT commands and
responses defined to use with the TCP/IP stack in HTTP Service.
10.1

Overview

Command
AT+HTTPINIT
AT+HTTPTERM
AT+HTTPPARA
AT+HTTPDATA
AT+HTTPACTION
AT+HTTPREAD
AT+HTTPSTATUS
10.2

Detailed Descriptions of Commands

10.2.1

AT+HTTPINIT Initialize HTTP Service

AT+HTTPINIT Initialize HTTP Service
Test Command
AT+HTTPINIT=?
Execution Command
AT+HTTPINIT
Reference
SIM5300E AT Command Manual V1.02
This command is applied to activate some applications such as HTTP, FTP.
Description
INITIALIZE HTTP SERVICE
TERMINATE HTTP SERVICE
SET HTTP PARAMETERS VALUE
INPUT HTTP DATA
HTTP METHOD ACTION
READ THE HTTP SERVER RESPONSE
READ HTTP STATUS
Response
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Note:
HTTPINIT should first be executed to initialize the HTTP service.
181