At+Ciprdtimer Set Remote Delay Timer; At+Cipsgtxt Select Gprs Pdp Context - SimCom SIM5300E At Command Manual

7.2.28

AT+CIPRDTIMER Set Remote Delay Timer

AT+CIPRDTIMER Set Remote Delay Timer
Test Command
AT+CIPRDTIMER=?
Read Command
AT+CIPRDTIMER?
Write Command
AT+CIPRDTIMER=<rdsigtimer>,
<rdmuxtimer>
Parameters
Reference
7.2.29

AT+CIPSGTXT Select GPRS PDP context

AT+CIPSGTXT Select GPRS PDP context
Test Command
AT+CIPSGTXT=?
Write Command
AT+CIPSGTXT=<mode>
Parameters
Reference
SIM5300E AT Command Manual V1.02
Response
+CIPRDTIMER: (100-4000),(100-7000)
OK
Response
+CIPRDTIMER: <rdsigtimer>,<rdmuxtimer>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<rdsigtimer> remote delay timer of single connection.
<rdmuxtimer> remote delay timer of multi-connections.
Note:
This command is used to shorten the disconnect time locally when the
remote server has been disconnected.
Response
+CIPSGTXT: (0,1)
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<mode>
0 select first PDP context
1 select second PDP context
Note:
This command is used to select pdp context, only for multi IP connection
(+CIPMUX=1).
172