At+Cipmode Select Tcpip Application Mode; At+Cipccfg Configure Transparent Transfer Mode - SimCom SIM5300E At Command Manual

Parameters
Reference
7.2.23

AT+CIPMODE Select TCPIP Application Mode

AT+CIPMODE Select TCPIP Application Mode
Test Command
AT+CIPMODE=?
Read Command
AT+CIPMODE?
Write Command
AT+CIPMODE=<mode>
Parameters
Reference
7.2.24

AT+CIPCCFG Configure Transparent Transfer Mode

AT+CIPCCFG Configure Transparent Transfer Mode
SIM5300E AT Command Manual V1.02
+CME ERROR: <err>
<mode>
0 Not set detect PDP
1 Set detect PDP
<interval>
1<=interval<=180(s)
<timer>
1<=timer<=10
Note:
If "+PDP: DEACT" urc is reported because of module not attaching to
gprs for a certain time or other reasons, user still needs to execute
"AT+CIPSHUT" command makes PDP context come back to original state.
Response
+CIPMODE:(0-NORMAL MODE,1-TRANSPARENT MODE)
OK
Response
+CIPMODE: <mode>
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
<mode>
0 Normal mode
1 Transparent mode
166