Suzuki SY413 Service Manual page 1914

1. Driven case bolt 2. Driven case
1. Rear case
2. Driven gear 3. Bar (rod)
1. Output pinion nut (30 mm)
2. Drive gear
1. Output pinion 2. Plastic hammer
7) Loosen driven case bolt and remove driven case.
8) Drive driven gear out of rear case.
9) Using special tool, hold drive gear securely and loosen output
pinion nut.
Special Tool
(A): 09927-76030
10) Drive out output pinion with plastic hammer.
11) Drive pinion bearing outer races out of rear case.
1. Bar (rod)
2. Outer race
3. Rear case
MANUAL TRANSMISSION 7A2-23