Suzuki SY413 Service Manual page 1672

Dimensions to use when fixing boot
with boot band.
Wheel side
*Fill grease
[1.3 L and 1.6 L engine model]
70 – 90 g (2.5 – 3.1 oz)
[1.8 L engine model]
90 – 110 g (3.2 – 3.8 oz)
*: Be sure to use grease supplied with spare parts.
REASSEMBLY (Center Shaft and
Center Bearing Support)
[1.3 L and 1.6 L Engine Model]
Install center shaft by reversing removal procedure and noting the
following points.
1. Circlip
D When installing bearing support circlip, make sure that it fits in
2. Center bearing
support
circlip groove in center bearing support securely as shown.
3. Center bearing
D When installing left side oil seal, use care so that it is in proper
direction by referring to left figure.
"A": Grease 99000-25010
1. Left side oil seal
D After press-fitting center shaft from left side oil seal side, fit circlip
into groove in shaft securely.
1. Circlip
2. Center shaft
LEFT SIDE DRIVE SHAFT
*Fill grease
[1.3 L and 1.6 L engine model]
80 – 100 g (2.8 – 3.5 oz)
[1.8 L engine model]
70 – 90 g (2.5 – 3.1 oz)
RIGHT SIDE DRIVE SHAFT
Differential side
*Fill grease
[1.3 L and 1.6 L engine model]
80 – 100 g (2.8 – 3.5 oz)
[1.8 L engine model]
70 – 90 g (2.5 – 3.1 oz)
FRONT DRIVE SHAFT 4-9
Differential side