9-4 BODY SERVICE
1. Door window regulator attaching screw
Securely seal door sealing cover with adhesive.
1. Door sealing cover
Install door window regulator handle so that it has a 455 angle
when glass is fully closed, as illustrated left.
DOOR WINDOW REGULATOR
REMOVAL
1) Remove door glass referring to "FRONT DOOR" in this section.
2) Remove window regulator attaching screws (six pcs.).
Then, take out regulator through hole (A).
INSPECTION
Check the following parts.
Check gear for wear or damage.
Check spring for weakened condition.
INSTALLATION
Reverse removal procedure for installation, and then noting the fol-
lowing instruction.
Apply multi-purpose grease to sliding parts.