Suzuki SY413 Service Manual page 1578

3D-10 FRONT SUSPENSION
1. Oil hydraulic press
2. Rod
3. Hub bolt
1. Outside inner
race
2. Wheel hub
10) Remove wheel bearing inner race.
Special Tools
(C): 09913-65810
(D): 09913-85230
1. Bearing inner race
INSTALLATION
Install Hub Bolts
Insert new stud in hub hole. Rotate stud slowly to assure serration
are aligned with those made by original bolt.
1) Install outside inner race to wheel hub using special tool.
Installing direction is as shown.
Special Tool
(E): 09944-98010
2) Apply grease to outside bearing, outside inner race and oil
seal lip.
"A": Grease 99000-25010
3) Install wheel hub to knuckle by tightening drive shaft nut. Do
not tap wheel hub.