Suzuki SY413 Service Manual page 2168

1. One-way clutch inner race
2. One-way clutch roller
3. Front planetary ring gear subassembly
9) Remove O-ring.
NOTE:
Never reuse O-ring after removal.
1. O-ring
INSPECTION
Visually check the following parts for scratches or discoloration.
D Outer surface of one-way clutch inner race.
D Outer surface of one-way clutch roller.
D Inner surface of front planetary ring gear subassembly.
REASSEMBLY
1) Apply A/T fluid to new O-ring.
2) Install O-ring.
1. O-ring
3) Install front planetary ring gear flange with snap ring.
1. Front planetary
ring gear flange
2. Snap ring
4) Coat new O-ring with A/T fluid.
5) Install new O-ring.
6) Install thrust needle roller bearing.
1. Thrust needle
roller bearing
2. O-ring
AUTOMATIC TRANSMISSION 7B1-115