Suzuki SY413 Service Manual page 1466

1B-32 AIR CONDITIONING (OPTIONAL)
F. LIP TYPE SEAL
Removal
1) Remove magnet clutch, referring to "C. MAGNET CLUTCH" in
this section.
2) Remove front head mounting screw (8 pcs).
1. Case
2. Front head
3) Remove front head pushing cylinder shaft.
NOTE:
Be careful not to remove cylinder from case.
4) Remove O-ring.
1. Front head
2. Cylinder shaft
3. Cylinder
4. Case
5. O-ring
5) Remove lip seal from front head.
1. Front head
2. Bearing puller
Installation
1) Press-fit lip seal into front head using special tool (E).
Special Tool
(E): 09991-06050
CAUTION:
Do not reuse mechanical seal once removed from
compressor.
1. Lip type seal
2. Front head