Suzuki SY413 Service Manual page 1625

1. Drive shaft nut
1. Wheel hub
1. Wheel hub
2. Hub bolt
1. Bearing outside inner race
REMOVE AND INSTALL WHEEL HUB,
WHEEL STUD/WHEEL BEARING OUTSIDE
INNER RACE
REMOVAL
1) Hoist vehicle and remove wheel.
2) Uncaulk drive shaft nut.
3) Pull up parking brake lever fully and remove drive shaft nut.
4) Remove brake drum referring to BRAKE DRUM REMOVAL of
SECTION 5.
5) Pull wheel hub off by using special tools.
Special Tool
(A): 09943-17912
(B): 09942-15511
6) Remove hub bolts.
Refer to FRONT WHEEL STUD REMOVAL in SECTION 3D for
removal procedure.
7) Remove wheel bearing inner race.
Special Tool
(C): 09913-65810
(D): 09925-88210
REAR SUSPENSION (4WD VEHICLE) 3E1-5