Suzuki SY413 Service Manual page 2151

7B1-98 AUTOMATIC TRANSMISSION
SUBASSEMBLY
OIL PUMP
1. O-ring
2. Oil pump body oil seal
3. Driven gear
4. Drive gear
1. Seal ring
2. Clutch drum thrust washer
1. Stator shaft subassembly
5. Oil pump body
6. Knock pin
7. Stator shaft subassembly
DISASSEMBLY
1) Remove two seal rings and clutch drum thrust washer from sta-
tor shaft subassembly back side.
NOTE:
Never reuse seal rings after removal.
2) Remove stator shaft subassembly by removing eight torx bolts
using torx wrench.
3) Remove oil pump body oil seal.
NOTE:
Never reuse oil seal after removal.
2. Torx bolt
8. Seal ring
9. Clutch drum thrust washer
10. Torx bolt