Suzuki SY413 Service Manual page 1767

[For vehicles not equipped with ABS]
[For vehicles equipped with ABS]
5) Install piston stopper bolt with pistons pushed in all the way and
tighten it to specified torque.
Tightening Torque
.
(a): 10 N m (1.0 kg-m, 7.5 lb-ft)
.
(b): 2.5 N m (0.25 kg-m, 2.0 lb-ft)
6) For installation on vehicle, refer to "INSTALLATION" under "RE-
MOVE AND INSTALL MASTER CYLINDER ASSEMBLY" in
this section.
BRAKES 5-73