Suzuki SY413 Service Manual page 1816

5B-32 ANTILOCK BRAKE SYSTEM (ABS)
ABS HYDRAULIC UNIT/CONTROL MODULE ASSEMBLY
1. ABS hydraulic unit /
control module assembly
HYDRAULIC UNIT INSPECTION
D Check hydraulic unit for fluid leakage.
If any, repair or replace.
REMOVAL
1) Disconnect negative cable at battery.
2) Using special tool, disconnect brake pipes from ABS hydraulic
2. Brake pipe
3) Disconnect ABS hydraulic unit/control module assembly con-
1. ABS hydraulic unit /
control module
connector
CAUTION:
Never disassemble ABS hydraulic unit/
control module assembly, loosen blind
plug or remove motor. Performing any
of these prohibited services will affect
original performance of ABS hydraulic
unit/control module assembly.
unit/control module assembly.
Special Tool
(A): 09950-78220
NOTE:
Put bleeder plug cap onto pipe to prevent fluid from spil-
ling. Do not allow brake fluid to get on painted surfaces.
nector.
1. Brake pipe
2. ABS hydraulic unit /
control module assembly
3. Bracket
4. Bracket bolt
5. Nut