Suzuki SY413 Service Manual page 1765

DISASSEMBLE AND ASSEMBLE MASTER CYLINDER
WARNING:
1.8L engine RH model's brake master cylinder cannot be disassembled. When any part of it other than
primary piston as described in CAUTION above has been disassembled, or when anything faulty is
found in it, it must be replaced as an assembly.
CAUTION:
1.8L engine RH model's brake master cylinder cannot be disassembled in principle. Should primary
piston have come off from cylinder while dismounting or handling it, wash it in the same specified
fluid as that in reservoir tank and place it back in cylinder.
[For vehicles not equipped with ABS]
[For vehicles equipped with ABS]
BRAKES 5-71
1. Piston stopper circlip
2. Piston stopper
3. Cylinder cup and plate
4. Primary piston
5. Piston cup
6. Secondary piston pressure cup
7. Piston cup
8. Secondary piston
9. Return spring secondary seat
10. Secondary piston return spring
11. Secondary piston stopper bolt
12. Master cylinder body
13. O-ring
1. Piston stopper circlip
2. Piston guide
3. Cup and retainer
4. Primary piston
5. Piston cup
6. Secondary piston pressure cup
7. Piston cup
8. Secondary piston
9. Secondary piston return spring
10. Piston stopper bolt (Supply valve stopper)
11. Master cylinder body