Suzuki SY413 Service Manual page 1539

1. Hole cover
1. Junction/fuse block
1. Junction/fuse block
1. Steering joint lower cover
2. Steering joint upper cover
STEERING WHEEL AND COLUMN (NOT EQUIPPED WITH AIR BAG) 3C-9
3) Remove hole cover.
4) Loosen clamp.
5) Remove band binding steering column and harness (for com-
bination switch).
6) Disconnect white 4-P connector (for auto cruise, optional).
7) Disconnect three connectors for combination switch wire har-
ness from junction/fuse block.
8) Disconnect three connectors for ignition switch wire harness
from junction/fuse block.
9) Remove steering joint upper cover.
10) Remove steering shaft upper joint bolt.
3. Steering shaft
upper joint bolt