Suzuki SY413 Service Manual page 2394

[A]
[B]
12) Check for water leakage by running water from hose over win-
dow. If leakage is found, dry window and fill leaky point with
adhesive. If water still leaks even after that, remove glass and
start installation procedure all over again.
NOTE:
[A]: Hatch-back model
[B]: Wagon model
Do not use high pressure water.
Do not blow compressed air directly at adhesive ap-
plied part when drying.
Do not use an infrared lamp or the like for drying.
CAUTION:
Upon completion of installation, note the following.
Sudden closing of door before adhesive is com-
pletely set may cause glass to become loose or to
come off. Therefore, if door is opened or closed
before adhesive is completely set, make sure to
open all door glasses and use proper care.
Each adhesive has its own setting time. Be sure to
refer to maker's instruction, check setting time of
adhesive to be used and observe precautions to
be taken before adhesive is set.
Refrain from driving till adhesive is completely set
so as to ensure proper and sufficient adhesion.
BODY SERVICE 9-25