Suzuki SY413 Service Manual page 1764

5-70 BRAKES
[Other than 1.8L engine RH model]
1) Install master cylinder as shown and torque attaching nuts to
specification.
Tightening Torque
.
(a): 13 N m (1.3 kg-m, 9.5 lb-ft)
2) Attach hydraulic lines and torque flare nuts to specification.
Tightening Torque
.
(b): 16 N m (1.6 kg-m, 11.5 lb-ft)
3) Connect reservoir lead wire.
4) Fill reservoir with specified brake fluid.
5) After installing, bleed air from system (Refer to "BLEEDING
BRAKES" in this section) and check brake pedal height and
play.
6) Perform brake test and check each installed part for fluid leak-
age.