23 - 66
BODY
REMOVAL AND INSTALLATION (Continued)
Fig. 73 Rear View Mirror
1 - WINDSHIELD
2 - REAR VIEW MIRROR
3 - REAR VIEW MIRROR CONNECTOR
Fig. 74 Body Vent
1 – BODY VENT
2 – TRUNK WELL SIDE PANEL
ADJUSTMENTS
FRONT DOOR LATCH ADJUSTMENT
(1) Insert a Torx -wrench through the elongated
hole in the door end frame near the latch striker
opening.
(2) Loosen Torx
head screw on the side of the
latch linkage.
(3) Push button on outside door handle and release
it.
(4) Tighten Torx head screw on latch.
(5) Verify latch operation.
REAR DOOR LATCH ADJUSTMENT
(1) Insert a Torx
hole in the door end frame near the latch striker
opening.
(2) Loosen screw on the side of the latch linkage.
(3) Push button on outside door handle and release
it.
(4) Tighten screw on latch.
(5) Verify latch operation.
SPECIAL TOOLS
BODY
STICK, TRIM C 4755
wrench through the elongated
PT