Chrysler PT Cruiser 2001 Service Manual Supplement page 1290

PT
REMOVAL AND INSTALLATION (Continued)
(25) Install gearshift cable to bracket and connect
to the manual valve lever.
(26) Install battery tray (Fig. 111).
(27) Install battery and hold-down clamp (Fig.
110).
(28) Install air cleaner assembly (Fig. 109).
(29) Connect battery cables.
(30) Fill transaxle with fluid. Refer to SERVICE
PROCEDURES for proper procedure.
OIL PUMP SEAL
REMOVAL
Fig. 120 Remove Oil Pump Seal
1 – TOOL C-3981–B
2 – OIL PUMP SEAL
INSTALLATION
Fig. 121 Install Oil Pump Seal
1 – TOOL C-4193
2 – HANDLE TOOL C-4171
DISASSEMBLY AND ASSEMBLY
VALVE BODY
DISASSEMBLY
(1) Remove manual shaft seal (Fig. 122).
Fig. 122 Manual Shaft Seal
1 – SEAL
2 – MANUAL SHAFT
(2) Remove Transmission Range Sensor retaining
screw (Fig. 123).
Fig. 123 Remove Transmission Range Sensor
Retaining Screw
1 – TRANSMISSION RANGE SENSOR
2 – MANUAL VALVE CONTROL PIN
3 – RETAINING SCREW
TRANSAXLE 21 - 105