Chrysler PT Cruiser 2001 Service Manual Supplement page 1332

PT
DISASSEMBLY AND ASSEMBLY (Continued)
(11) Install the UD clutch flat snap ring (Fig. 282).
Fig. 282 UD Clutch Flat Snap Ring
1 – UNDERDRIVE CLUTCH REACTION PLATE FLAT SNAP RING
2 – SCREWDRIVER
(12) Install the last UD clutch disc (Fig. 283).
Fig. 283 Install Last UD Clutch Disc
1 – ONE UNDERDRIVE CLUTCH DISC
(13) Install the OD/UD clutch reaction plate and
snap ring (Fig. 284) (Fig. 285). The OD/UD clutches
reaction plate has a step on both sides. Install the
OD/UD clutches reaction plate tapered step side up.
Fig. 284 OD/UD Reaction Plate
1 – OD/UD CLUTCH REACTION PLATE (STEP SIDE DOWN)
Fig. 285 Tapered Snap Ring
1 – OVERDRIVE/UNDERDRIVE CLUTCHES REACTION PLATE
TAPERED SNAP RING
2 – SCREWDRIVER (DO NOT SCRATCH REACTION PLATE)
NOTE: Snap ring ends must be located within one
finger of the input clutch hub. Be sure that snap
ring is fully seated, by pushing with screwdriver,
into snap ring groove all the way around.
TRANSAXLE 21 - 147