Chrysler PT Cruiser 2001 Service Manual Supplement page 1034

PT
REMOVAL AND INSTALLATION (Continued)
Fig. 108 Rear Crankshaft Seal and Special Tool
6926-1
1 – SPECIAL TOOL 6926–1 PILOT
2 – SEAL
Fig. 109 Crankshaft Seal and Special Tools 6926-2 &
C-4171
1 – SPECIAL TOOL 6926–1 PILOT
2 – SEAL
3 – SPECIAL TOOL 6926–2 INSTALLER
4 – SPECIAL TOOL C-4171
2001 PT CRUISER
Fig. 110 Rear Crankshaft Seal—Installation
1 – SPECIAL TOOL 6926–2 INSTALLER
(4) Install flex plate. Apply Mopar
Adhesive to bolt threads and tighten bolts to 95 N·m
(70 ft. lbs.).
(5) Install transaxle. Refer to TRANSAXLE for
procedure.
CRANKSHAFT
REMOVAL
(1) Remove engine assembly. Refer to procedure in
this section.
(2) Remove structural collar from oil pan to tran-
saxle housing.
(3) Separate transaxle from engine.
(4) Remove drive plate/flywheel.
(5) Remove crankshaft rear oil seal. Refer to pro-
cedure in this section.
(6) Mount engine on a suitable repair stand.
(7) Remove crankshaft damper, timing belt, and
tensioner. Refer to procedures in this section.
(8) Remove camshaft sprocket and rear timing belt
cover. Refer to procedures in this section.
(9) Remove crankshaft sprocket. Refer to proce-
dure in this section.
2.0L DOHC ENGINE
Lock & Seal
9a - 51