PT
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 234 Remove Piston Retainer
1 – LOW/REVERSE CLUTCH PISTON RETAINER
2 – GASKET
Fig. 235 Remove Piston Retainer Gasket
1 – GASKET HOLES MUST LINE UP
2 – LOW/REVERSE CLUTCH PISTON RETAINER GASKET
Fig. 236 Remove Output Bearing Inner Cup
1 – OUTPUT BEARING CUPS (REPLACE IN PAIRS)
2 – HAMMER
3 – BRASS DRIFT
CAUTION: Drift bearing cup all the way around.
Fig. 237 Remove Output Bearing Outer Cup
1 – TOOL 6062
OIL PUMP
DISASSEMBLY, INSPECTION, & ASSEMBLY
When disassembling the transaxle it is necessary
to inspect the oil pump for wear and damage.
(1) Remove the reaction shaft support bolts.
(2) Remove reaction shaft support from pump
housing (Fig. 238).
Fig. 238 Reaction Shaft Support
1 – PUMP HOUSING
2 – REACTION SHAFT SUPPORT
3 – PUMP GEARS
TRANSAXLE
21 - 135