Chrysler PT Cruiser 2001 Service Manual Supplement page 1365

21 - 180 TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 397 Checking Side Gear End Play (Extension
Housing Side)
1 – SPECIAL TOOL C-4996 (NOTE POSITION)
2 – DIAL INDICATOR SET
3 – DIFFERENTIAL ASSEMBLY
4 – SIDE GEAR
NOTE: Side gear end play must be BETWEEN 0.001
to 0.013 inch.
Fig. 398 Checking Side Gear End Play (Bearing
Retainer Side)
1 – SPECIAL TOOL C-4996 (NOTE POSITION)
2 – DIAL INDICATOR SET
3 – DIFFERENTIAL ASSEMBLY
ASSEMBLY
NOTE: Use Mopar Silicone Rubber Adhesive Seal-
ant, or equivalent, on retainer and extension hous-
ing/adapter plate to seal to case.
(1) Using Miller Special Tool L-4410, and C-4171,
install differential bearing to differential (extension
housing side) (Fig. 399).
Fig. 399 Position Bearing Cone Onto Differential
1 – DIFFERENTIAL ASSEMBLY
2 – DIFFERENTIAL BEARING
(2) Using Miller Special Tool 5052 and C-4171,
install differential bearing to differential (bearing
retainer side).
(3) Using Miller Special Tool 6061 and C-4171,
install differential bearing race to bearing retainer
(Fig. 400).
Fig. 400 Differential Bearing Retainer
1 – DIFFERENTIAL BEARING CUP
2 – DIFFERENTIAL BEARING RETAINER
(4) Using Miller Special Tool L–4520 and C-4171,
install differential bearing to extension housing.
PT