Chrysler PT Cruiser 2001 Service Manual Supplement page 1355

21 - 170 TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
NOTE: Verify that Miller Tool 5058 is centered prop-
erly to the 2/4 clutch retainer before depressing the
tool.
Fig. 360 Install 2/4 Clutch Retainer Snap Ring
1 – TOOL 5058
2 – SCREWDRIVER
3 – SNAP RING
4 – 2/4 CLUTCH RETAINER
Fig. 361 Check 2/4 Clutch Clearance
1 – DIAL INDICATOR
2 – HOOK TOOL
3 – DIAL INDICATOR TIP TOOL 6268
Press down clutch pack with finger and zero dial
indicator. The 2/4 clutch pack clearance is 0.76 to
2.64mm (0.030 to 0.104 inch). If not within specifi-
cations, the clutch is not assembled properly. There
is no adjustment for the 2/4 clutch clearance.
Fig. 362 Install Rear Sun Gear
1 – #7 NEEDLE BEARING
2 – REAR SUN GEAR
Fig. 363 Install Front Carrier and Rear Annulus
Assembly
1 – #6 NEEDLE BEARING
2 – FRONT CARRIER AND REAR ANNULUS ASSEMBLY (TWIST
AND PULL OR PUSH TO REMOVE OR INSTALL).
PT