Chrysler PT Cruiser 2001 Service Manual Supplement page 1209

21 - 24 TRANSAXLE
DISASSEMBLY AND ASSEMBLY (Continued)
(18) Remove transaxle from press.
(19) Carefully remove transaxle case from the
shaft assemblies and bench fixture (Fig. 73). Be sure
the oil–feed trough to the end bearings is not dam-
aged (Fig. 74).
Fig. 73 Transaxle Case Removal
1 – TRANSAXLE CASE
2 – BENCH FIXTURE
3 – GEARTRAIN
Fig. 74 Oil Feed Trough
1 – OIL FEED TROUGH
(20) TRANSAXLE
Remove the reverse brake blocking ring, shim,
reverse brake friction cone, bearing and race from
the input shaft assembly (Fig. 75) (Fig. 76) (Fig. 77)
(Fig. 78) (Fig. 79). TRANSAXLE W/O REVERSE
BRAKE: Remove plastic spacer from the input shaft
assembly.
(21) Remove the shift blocker assembly from the
bench fixture (Fig. 80).
W/REVERSE BRAKE:
Fig. 75 Reverse Brake Shim
1 – REVERSE BRAKE SHIM
2 – REVERSE BRAKE FRICTION CONE
Fig. 76 Reverse Brake Friction Cone
1 – REVERSE BRAKE FRICTION CONE
Fig. 77 Reverse Brake Blocking Ring
1 – REVERSE BRAKE BLOCKING RING
PT