Chrysler PT Cruiser 2001 Service Manual Supplement page 1071

13 - 2 FRAME AND BUMPERS
DESCRIPTION AND OPERATION (Continued)
FRONT BUMPER REINFORCEMENT
1 – U-NUTS(S)
2 – FRONT BUMPER FASCIA REINFORCEMENT
REAR BUMPER FASCIA
1 – REAR BUMPER FASCIA
2 – REAR BUMPER FASCIA ENERGY FOAM
3 – REAR FASCIA TO CLOUSER STUD PLATE
REMOVAL AND INSTALLATION
FRONT BUMPER FASCIA
REMOVAL
(1) Remove Grille Attaching bolts.
(2) Remove Grille.
(3) Remove nuts attaching front bumper fascia to
bottom of fender flange (Fig. 1).
Fig. 2
Fig. 3
REAR BUMPER REINFORCEMENT
1 – REAR BUMPER REINFORCEMENT
(4) Remove fasteners attaching fascia to bumper
reinforcement forward of radiator (Fig. 5).
(5) Remove fasteners attaching fascia to bottom of
bumper reinforcement.
(6) Remove air dam fasteners from crossmember.
(7) Remove splash shield attaching screws.
(8) Remove fascia from vehicle.
Fig. 5 Front Fascia Attaching Points
1 – ATTACHING POINTS
2 – FRONT FASCIA
INSTALLATION
(1) Position fascia on vehicle (Fig. 1).
(2) Install splash shield attaching screws.
(3) Install air dam fasteners to crossmember.
(4) Install fasteners attaching fascia to bottom of
bumper reinforcement.
Fig. 4
PT