Chrysler PT Cruiser 2001 Service Manual Supplement page 1469

23 - 60 BODY
REMOVAL AND INSTALLATION (Continued)
SIDE COWL TRIM
REMOVAL
(1) Disengage clips attaching cowl trim to cowl
side panel.
(2) Remove cowl trim from vehicle (Fig. 64).
Fig. 64 Side Cowl Trim
1 - COWL ASSEMBLY
2 - COWL SIDE TRIM PANEL
INSTALLATION
(1) Position cowl trim panel to inner cowl panel
(Fig. 64).
(2) Align locating pins on backside of cowl trim
panel to mating holes in inner cowl panel.
(3) Push clips on trim panel into slots in inner
cowl panel.
B-PILLAR TRIM
REMOVAL
(1) Remove shoulder belt height control knob.
(2) Remove bolt attaching turning loop to belt
adjuster (Fig. 65).
(3) Remove bolt attaching lower seat belt anchor to
floor pan kick- up.
(4) Remove upper B-pillar trim.
(5) Remove access cover from B-pillar trim.
(6) Disengage clips attaching trim to B-pillar.
(7) Feed seat belt turning loop and seat belt
through trim panel.
(8) Remove lower B-pillar trim from vehicle.
INSTALLATION
NOTE: Tighten all seat belt bolts to 40 N·m (40 ft.
lbs.) torque.
Fig. 65 B-pillar Trim
1 - B-PILLAR
2 - SEAT BELT ADJUSTER
3 - B-PILLAR UPPER TRIM COVER
4 - B-PILLAR LOWER TRIM COVER
5 - SEAT BELT ASSEMBLY
(1) Position lower B-pillar trim panel near B-pillar
(Fig. 65).
(2) Feed seat belt turning loop and seat belt
through trim panel.
(3) Align locating pins on backside of trim panel to
mating holes in B-pillar.
(4) Push clips on trim panel into slots in B-pillar.
(5) Install access cover to B-pillar trim.
(6) Install bolt attaching turning loop to belt
adjuster.
(7) Move height adjuster to the lowest position.
(8) Install upper B-pillar trim.
(9) Install shoulder belt height control knob.
(10) Install bolt attaching lower seat belt anchor to
floor pan kick-up.
UPPER C-PILLAR TRIM PANEL
REMOVAL
(1) Disengage clips attaching trim to C-pillar (Fig.
66).
(2) Remove upper trim panel from vehicle.
PT