Chrysler PT Cruiser 2001 Service Manual Supplement page 1468

PT
REMOVAL AND INSTALLATION (Continued)
Fig. 61 Liftgate Outside Handle
1 - Liftgate Outside Handle
2 - Pull Lever Arm
3 - Liftgate
4 - Attaching Push Nuts
5 - Attaching Nuts
A-PILLAR TRIM
REMOVAL
(1) Disengage clips attaching trim to A-pillar.
(2) Remove A-pillar trim from vehicle (Fig. 62).
Fig. 62 A-pillar Trim
1 - WINDSHIELD ( A-PILLAR ) SIDE GARNISH TRIM
2 - INSTRUMENT PANEL TOP COVER
INSTALLATION
(1) Position A-pillar trim panel to A-pillar (Fig.
62).
(2) Align locating pins on backside of trim panel to
mating holes in A-pillar.
(3) Push clips on trim panel into slots in A-pillar.
DOOR SILL TRIM
REMOVAL
(1) Open door to gain access to sill trim.
(2) Disengage clips attaching sill trim to door sill
and door opening flange.
(3) Remove door sill trim from vehicle (Fig. 63).
Fig. 63 Door Sill Trim
1 - SILL SCUFF PLATE ATTACHING NUT
2 - FRONT DOOR SILL SCUFF PLATE
3 - FRONT SILL SCUFF PROTECTOR - RHD
4 - B-PILLAR
5 - B-PILLAR SEAT BELT ACCESS COVER
6 - REAR DOOR SILL SCUFF PLATE
7 - CLOSE OUT COVER
INSTALLATION
(1) Position door sill trim on door sill (Fig. 63).
(2) Align locating pins on backside of trim panel to
holes in door sill.
(3) Engage clips on trim panel into slots in door
sill.
(4) Engage clips on trim panel onto door opening
flange.
(5) Press downward on trim panel to fully engage
all clips.
BODY 23 - 59